1 inch Green Living Cordless Mini Blinds

An outside mount is a great choice for better light coverage, since it fully covers the window and frame. To get the right fit, you’ll need to account for a few extra measurements when placing your order. We’ll custom make your shade to the exact dimensions you provide—no automatic additions are made.

Flat Surface Requirements

Start by choosing where you’d like to mount your shade. You’ll need at least 1-2½” of flat mounting space. For more details, check the product page and review the “Specifications” tab.

• Measure the width of the window in three places (top, middle, and bottom).
• Take the largest width out of the three measurements.
• You’ll use that measurement and add the recommended minimum of 4 inches. If the window opening is 72”, for example, it‘s recommended to order 76”, giving you 2” of added coverage on each side of the window. This will give you more light and privacy control, eliminating light gap coverage.
• Adjust the additions as much as you’d like, but an extra 2” on each side is a good place to start.
• This is the width you will input into your order.

• Measure the height starting at the top left, then the center, and finally the top right down to the window sill.
• You’ll use the largest of the three measurements and add the recommended minimum of 4 inches. For example, if the height of your window is 36” inches, order 40”. This will provide enough of a flat surface to mount the blind on top, all while giving your maximum privacy and light control. Adding 2” on each side is a good rule of thumb, but you can add to that if you want even more coverage.
• That’s the height you’ll use when ordering.