The Honeycomb shades seen exclusively on ABC's Extreme Makeover: Home Edition... accept no substitutes. SelectBlinds™ cellular shades are the pinnacle of energy efficiency. With their double honeycomb construction, SelectBlinds™ cell shades not only provide the highest level of insulation, but also filter out harsh UV rays that can damage interiors and upholstery. SelectBlinds™ Honeycomb shades can be customized to darken an especially bright room. Select Blinds cell shades will significantly reduce the amount of light and give a warm feeling to any room. As with all of our products, cellular shades come with a limited lifetime warranty and free shipping.
features
Custom made in the USA.
No visible cord holes provides better privacy and eliminates light leaks through cord holes.
Light gray color on backside (streetside) of fabric.
Crash proof cord lock securely protects sill from damage.
Snap-in brackets for easy installation.
Limited lifetime warranty.
100 % Polyester which provides crisp pleats.
3/8" Double cell pleats.
Includes all mounting hardware.
Conforms with C.P.S.C. child safety guidelines.
options
2 on 1 headrail
Top down / bottom up available.
Continuous cord loop available and recommended for ease in raising larger shades.
Cordless Lift System for child safety.
specifications
Minimum width: 12"
Maximum width: 96"
Minimum height: 8"
Maximum height: 120"
Headrail may not match the exact color of the shade but will be closely coordinated.
Continuous cord loop system comes with white headrail only.
Top down / bottom up shades come with 2 sets of lift cords. One on the right and one on the left.
%UV Blockage - 99.9%
Minimum mounting surface - standard=1/2", continuous cord & amp; top down bottom up =3/4".
Note: Delivery times begin AFTER production.
Oversize blinds must be shipped ground and may take longer
to arrive. Estimated arrival time does not include holidays.
Note: Delivery times begin AFTER production.
Oversize blinds must be shipped ground and may take longer
to arrive. Estimated arrival time does not include holidays.
All cellular shades except VuThru and EcoTrack Width
Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
*Headrail will be made 1/4" less than width ordered, including endcaps. Fabric will be made 1/2 inch less than width ordered.
Height
Measure the exact height (top to bottom) from the top inside edge down to the window sill in three places.
Take the largest of the three measurements.
Write down that size making sure that it is the second number of the measurement. This is the height you will order.
*width and length measurements may vary +/- 1/8"
VuThru Shades Width
Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
Outside mount headrail will be plus 3/8". Outside mount fabric width will be ordered width.
Height
Measure the exact height (top to bottom) from the top inside edge down to the window sill in three places.
Take the largest of the three measurements.
Write down that size making sure that it is the second number of the measurement. This is the height you will order.
When the vanes are expanded (closed), the bottom rail touches the window sill. When the vanes are compressed (open), the bottom rail may lift off the sill slightly. This is normal.
*width and length measurements may vary +/- 1/8"
How to Measure EcoTrack Products
EcoTrack products are available as inside mount only.
Width
Measure the exact width (left to right) of the inside edge of the window frame in 3 places (top, middle, and bottom).
Take the smallest of the 3 measurements; this is the width that you will order.
Factory will make the following deductions: o Headrails: 1" less than width ordered. o Fabric: 1 1/8" less than width ordered.
Mounting requirements: o Minimum inside mount depth: 1 ½". o Flush inside mount: 2".
Height
Measure the exact height (top to bottom) from the top inside edge down to the window sill in 3 places.
Take the largest of the 3 measurements; this is the height that you will order.
Factory will make the following deductions: o The side tracks will be 1/8" shorter than the height ordered.
*width and length measurements may vary +/- 1/8"
All cellular shades except Vuthru Width
Measure the exact width (left to right) of the wooden or metal window frame or how wide you would like the blind or shade to be.
Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 72", it might be helpful to order 76". This will provide 2" coverage on each side of the window.
There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening.
Fabric will be made at ordered width and headrail will be ordered width plus ¼"
Write down that size making sure that it is the first number of the measurement.
Height
Measure the height you would like the blind to be by measuring top to bottom.
We recommend adding about 3 or 4 inches to this number to insure maximum light gap coverage and to cover the window completely.
Please be sure to know that the height measurement will always include the headrail. Example: if the height ordered is 50" this will be the height including the headrail (from the very top of the headrail to the bottom rail).
You will want to mount the headrail above the window frame. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.
*width and length measurements may vary +/- 1/8"
VuThru Shades Width
Measure the exact width (left to right) of the wooden or metal window frame or how wide you would like the blind or shade to be.
Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 36", it might be helpful to order 40". This will provide 2" coverage on each side of the window.
There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
Headrail will measure ordered width plus 3/8".
Fabric will measure ordered width.
Height
Measure the height you would like the blind to be by measuring top to bottom.
We recommend adding about 3 or 4 inches to this number to insure maximum light gap coverage and to cover the window completely.
Please be sure to know that the height measurement will always include the headrail. Example: if the height ordered is 80" this will be the height including the headrail (from the very top of the headrail to the bottom rail).
You will want to mount the headrail above the window frame. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.
Headrail is 2 1/8" in height.
*width and length measurements may vary +/- 1/8"
professional measuring service
Would you like a professional to measure your windows before you order your blinds?
