Measuring Instructions for Sheer Shades Menu

Sheer shades are the perfect blend of traditional horizontal blinds and modern shades. With a sheer overlay, you get the best of both worlds when you order sheer shades.

Instructions for Inside Mounted Sheer Shades

Depth Requirements

  • For an inside mount, you’ll need to make sure the window frame is deep enough to accommodate sheer shades. Read more about this by visiting the “Product Info” tab on the sheer shade’s main page.

Measuring the width

Measure the width
  • The width measurement is found by measuring the inside of the window frame in three locations – the top, middle, and bottom.  Choose the smallest of these measurements.
  • If you get a 1/16" or 1/32" increment, round down to the nearest 1/8". (For example, if the smallest measurement is 24 9/16", round down to 24 1/2". If it's 24 3/8", no need to round down.)
  • And that’s it! That’s the width measurement you’ll use when placing your order for sheer shades.

Measuring the height

Measure the height
  • The height measurement is found by measuring the inside of the window frame in three locations – the top left, center, and the top right.  Choose the largest of these measurements. 
  • If you get a 1/16" or 1/32" increment, round up to the nearest 1/8". (For example, if the largest measurement is 24 9/16", round up to 24 5/8". If it's 24 1/2", no need to round up.)
  • And that’s it! That’s the height measurement you’ll use when placing your order for sheer shades.

Don’t worry about making your own deductions. We’ll take care of that for you automatically. Do not make your own deductions. Do not add to the width to make up for any deductions. If you would like more light coverage, consider an outside mount. See chart below for the deductions per collection:

Instructions for Outside Mounted Sheer Shades

An outside mount sits outside of the window and the window frame. Because it is meant to cover the entire space of the window, and more, you’ll need to make some additions to the measurements to make sure you order the right size. 

Flat surface requirements

  • Visit the “Product Info” tab on your sheer shade’s page to find out about the flat surface requirements for an outside mount. Usually, you’ll need about 1” of flat wall to make it work.

Measuring the width

Measure the width
  • The width is found by measuring the top, middle, and bottom of the window.
  • Take the largest width and add at least 2 inches to each side to give you more light coverage.
  • Here’s your width for your sheer shades.

Measuring the height

Measure the height
  • The height is found by measuring the top left of the window to the bottom, the middle, and the top left.
  • Take the largest height and add at least 2 inches to the top and to the bottom to give you more light coverage.
  • Here’s the height for your sheer shades.
Was this article helpful?

Sheer shades are the perfect blend of traditional horizontal blinds and modern shades. With a sheer overlay, you get the best of both worlds when you order sheer shades.

Sheer Shades Minimum depth required for secure inside mount Minimum depth needed for flush inside mount Flat surface for outside mount Total Deduction
2 1/2" LF/RD/Serene Sheer 1" 3 3/8" 1"
  • Inside Mount: 1/8" off headrail & 1" off fabric
  • Outside Mount: 3/4" off fabric
2 1/2" Tranquil/Casual Sheer 1 1/4" 3 1/4" 5/8"
  • Inside Mount: 1/4" off headrail & 1 7/8" off fabric
  • Outside Mount: 1 1/2" off fabric
2 1/2" Minimalist 1" 3 3/4" 1 1/4"
  • Continuous Cord Loop: 1 1/8" off inside mount fabric & 1" off outside mount fabric
  • Cordless: 7/8" off inside mount fabric & 3/4" off outside mount fabric
  • Motorized Wand: 1" off inside mount fabric & 7/8" off outside mount fabric
  • Cassette: 1/8" off inside mount width
2 " Tranquil/Casual Sheer 1 1/4" 3 1/4" 5/8"
  • Inside Mount: 1/4" off headrail & 1 7/8" off fabric
  • Outside Mount: 1 1/2" off fabric

2" LF/RD/Designer Sheer

1" 3 3/8" 1"
  • Inside Mount: 1/8" off headrail & 1" off fabric
  • Outside Mount: 3/4" off fabric

2" Modern 

1" 3 3/4" 1 1/4"
  • Continuous Cord Loop: 1 1/8" off inside mount fabric & 1" off outside mount fabric
  • Cordless: 7/8" off inside mount fabric & 3/4" off outside mount fabric
  • Motorized Wand: 1" off inside mount fabric & 7/8" off outside mount fabric
  • Cassette: 1/8" off inside mount width

3" RD/Prestige Sheer

1" 3 3/8" 1"
  • Inside Mount: 1/8" off headrail & 1" off fabric
  • Outside Mount: 3/4" off fabric

3" Luxe Modern/Eclectic Sheer

1" 3 3/4" 1"
  • Inside Mount: 7/8" off fabric for Cordless & 1" off fabric for Motorized Wand & Motorization
  • Outside Mount: 1/2" off fabric for Cordless & 5/8" off fabric for Motorized Wand & Motorization

3" Sleek

1" 3 3/4" 1 1/4"
  • Continuous Cord Loop: 1 1/8" off inside mount fabric & 1" off outside mount fabric
  • Cordless: 7/8" off inside mount fabric & 3/4" off outside mount fabric
  • Motorized Wand: 1" off inside mount fabric & 7/8" off outside mount fabric
  • Cassette: 1/8" off inside mount width

Instructions for Inside Mounted Sheer Shades

Depth Requirements

  • For an inside mount, you’ll need to make sure the window frame is deep enough to accommodate sheer shades. Read more about this by visiting the "Specifications" tab on the sheer shade’s main page.

Measuring the width

Measure the width
  • The width measurement is found by measuring the inside of the window frame in three locations – the top, middle, and bottom.  Choose the smallest of these measurements.
  • If you get a 1/16" or 1/32" increment, round down to the nearest 1/8". (For example, if the smallest measurement is 24 9/16", round down to 24 1/2". If it's 24 3/8", no need to round down.)
  • And that’s it! That’s the width measurement you’ll use when placing your order for sheer shades.

Measuring the height

Measure the height
  • The height measurement is found by measuring the inside of the window frame in three locations – the top left, center, and the top right.  Choose the largest of these measurements. 
  • If you get a 1/16" or 1/32" increment, round up to the nearest 1/8". (For example, if the largest measurement is 24 9/16", round up to 24 5/8". If it's 24 1/2", no need to round up.)
  • And that’s it! That’s the height measurement you’ll use when placing your order for sheer shades.

Don’t worry about making your own deductions. We’ll take care of that for you automatically. Do not make your own deductions. Do not add to the width to make up for any deductions. If you would like more light coverage, consider an outside mount. See chart below for the deductions per collection (Deductions may vary +/- 1/8"):

Instructions for Outside Mounted Sheer Shades

An outside mount sits outside of the window and the window frame. Because it is meant to cover the entire space of the window, and more, you’ll need to make some additions to the measurements to make sure you order the right size.

Flat surface requirements

  • Visit the "Specifications" tab on your sheer shade’s page to find out about the flat surface requirements for an outside mount. Usually, you’ll need about 1” of flat wall to make it work.

Measuring the width

Measure the width
  • The width is found by measuring the top, middle, and bottom of the window.
  • You’ll use that measurement and add the recommended minimum of 4 inches. This will ensure the window is properly covered.
  • Here’s your width for your sheer shades.

Measuring the height

Measure the height
  • The height is found by measuring the top left of the window to the bottom, the middle, and the top left.
  • You’ll use the largest of the three measurements and add the recommended minimum of 4 inches. This will ensure the window is properly covered.
  • Here’s the height for your sheer shades.
Free Shipping on Everything