Great Blinds
by stenpas1@yahoo.com
from Ellington NY
Overall Rating:
Appearance:
Construction:
Installation:
Value:
The blinds are a great value and beautiful!! I shopped around a lot and have not found a better price or looking blind. I have ordered several different styles and blinds and even purchased one as a gift.
Who measured your window for this product?
Family or Friend
Who installed this product?
Me
Get a shutter look at the fraction of the price of wood shutters. The 2 ½” Veneto Wood blinds offer a sophisticated look to any room. The 2 ½” slats offer a grater view to the outside and are normally lighter in weight as the blinds don’t require many slats. Choose from a variety of stains and whites to compliment any room décor. These timeless wood blinds will last a lifetime as they are backed up with a limited lifetime warranty.
Features
90 day satisfaction guarantee.
Wood blinds come with a 3” decorative valance.
Most colors match the 1” and 2 ½” Veneto Wood Blinds.
Available with wand or cord tilt. Available with wand or cord tilt.
Contoured bottom rail.
Matching wood tassels.
Confirms with CPSC guidelines.
Custom made in the USA.
Limited lifetime warranty.
Options
Choose the sleek look of 2 blinds or 3 blinds on 1 headrail for larger windows
No Holes – Privacy option allows for greater light control and for slats to be removed for easy cleaning.
Specifications
Minimum width: 12"
Maximum width: 84"
Minimum height: 12"
Maximum height: 96"
Headrail size 2 x 2 ¼”.
Minimum mounting space is 1 1/8”.
Flush mounting space required 3”.
Blinds 12” and smaller in width will have center tilt only, no lift cord.
Blinds 18” and smaller are only available with opposite side controls, no same side controls.
Cloth tape is 1 ½” wide. ¾” will show on each side.
Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
*production department will deduct 1/4 inch of width on each side of blind, total of 1/2 inch on inside mounted blinds to allow for mounting brackets.
Height:
Measure the exact height (top to bottom) from the top inside edge down to the window sill in three places.
Take the largest of the three measurements.
Write down that size making sure that it is the second number of the measurement. This is the height you will order.
Measuring Instructions For Wood Blinds
Wood Blinds - Outside Mount
Width:
Measure the exact width (left to right) of the wooden or metal window frame or how wide you would like the blind to be.
Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 36", it might be helpful to order 40". This will provide 2" coverage on each side of the window.
There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening.
Keep in mind that the valance will be about 2" wider than width ordered.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
Height:
Measure the height you would like the blind to be by measuring top to bottom.
We recommend adding about 3 or 4 inches to this number to insure maximum light gap coverage and to cover the window completely.
Please be sure to know that the height measurement will always include the headrail. Example: if the height ordered is 50" this will be the height including the headrail (from the very top of the headrail to the bottom rail).
You will want to mount the headrail above the window frame. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.
Headrail is 2.25" in height.
*width and length measurements may vary +/- 1/8"
Professional Measuring Service
Would you like a professional to measure your windows before you order your blinds?