The Good Housekeeping 2" Room Darkening Sheer Shades are part of the custom blinds and shades line offered by Selectblinds.com. While it looks delicate, the two layers of sheer fabrics are resilient at blocking damaging UV rays from entering your home, preventing the fading of floors, furniture and upholstery. The room darkening 2" sheer shades are ideal for bedrooms as they block incoming light when in the closed position. Shop with confidence as these shades are backed by the Good Housekeeping Seal.
Features
The contoured cassette conceals the shade fabric and mechanisms for a finished look.
The shade raises and lowers by pulling on a polyester cord loop that also open and closes the fabric vanes.
Combines the light control of a horizontal blind with the look of a fabric shade.
The backing is always white for a uniform appearance.
Shades come standard with a continuous cord loop.
Conforms with C.P.S.C. child safety guidelines.
Backed by the Good Housekeeping Seal.
Privacy Factor: 4.5 out of 5
Options
Raise and lower shades at the push of a button with motorization.
Specifications
Minimum width: 12"
Maximum width: 114"
Minimum height: 12"
Maximum height: 122"
Inside mount headrail will measure ordered width minus 3/16”. Fabric will measure ordered width minus 1 1/8”.
Outside mount headrail will be ordered width plus 3/16”. Fabric will measure ordered width minus ¾”.
The window shading must only be raised a maximum of 24" in the open position to avoid damaging the fabric.
Side mount: headarail will be ordered width minus 11/16 inches Fabric will be ordered width minus 1 5/8 inches
Ultra Sleek Headrail: Mounting requirements, need 2 7/8 inch for full flush mount.
Ultra Sleek Headrail has a coordinating fabric insert.
For shades over 85 inches wide or ordered with Motorization the Ultra Sleek Plus headrail will be used. Minimum flush mount needed is 3 3/4 inches.
Please indicate in the notes section any shades that will be side by side so vane alignment can be optimized. Please take into consideration the cord tensioner placement, see install instructions for more detail.
Shipping & Production
Information
Free shipping on all orders inside the continental United States.
All Good Housekeeping 2" Room Darkening Sheer Shades
are custom made to your specifications and typically ship 8 to 10 business days after ordering.
Please allow 1 to 5 additional business days for shipping.
2 day FedEx or UPS express shipping is available on all products.*
Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
Deductions:
Headrail will measure ordered width minus 1/4".
Fabric will measure ordered width minus 1 1/8".
Height:
Measure the exact height (top to bottom) from the top inside edge down to the window sill in three places.
Take the largest of the three measurements.
Write down that size making sure that it is the second number of the measurement. This is the height you will order.
Measuring Instructions For
- Outside Mount
Width:
Measure the exact width (left to right) of the wooden or metal window frame or how wide you would like the blind or shade to be.
Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 36", it might be helpful to order 40". This will provide 2" coverage on each side of the window.
There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
Headrail will measure ordered width plus 1/4".
Fabric will measure ordered width minus 3/4".
Height:
Measure the height you would like the blind to be by measuring top to bottom.
We recommend adding about 3 or 4 inches to this number to insure maximum light gap coverage and to cover the window completely.
Please be sure to know that the height measurement will always include the headrail. Example: if the height ordered is 80" this will be the height including the headrail (from the very top of the headrail to the bottom rail).
You will want to mount the headrail above the window frame. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.
Headrail is 2 7/8" in height.
The length of the shade will be the exact length ordered when the vanes are tilted in the open position. When the vanes are tilted shut the shade will become 3/8" longer.